A microphone plugged into input 1 of a client’s Focusrite OctoPre was showing up on ADAT inputs 1 and 2 in Focusrite Control on his Scarlett 18i20, and I haven’t yet found out why.
I came across this while I was troubleshooting some other things for him. The only thing connected to the OctoPre was a microphone on channel 1. The OctoPre goes into the Scarlett 18i20 over an optical ADAT lead, and in Focusrite Control the microphone was coming up on ADAT inputs 1 and 2 at the same time, when it should only have been showing on input 1.
The front panel of the OctoPre was only lighting up on input 1, so I thought the problem was more likely to be happening on the ADAT connection or in the computer.
So I double checked his ADAT connection at the rear of the OctoPre. There are two optical ports the lead can go out of, and which one you use depends on the mode you’re using it in, or the sample rate you’re running at.
- Tried the optical lead in both ADAT ports on the OctoPre.
- At 44.1 or 48 kHz, one of the ports worked and the other one didn’t work at all.
Even so, I’m not sure why the microphone was coming up on inputs 1 and 2 at the same time. I’m leaving this one as unsolved, but I’ve put the case study up in case other people are having this problem, and maybe we could work together to solve it.
The solution might be to upgrade Focusrite Control. He was using an older version of OS X, and it’s possible that’s the reason, but he may not be able to upgrade the software because of the age of his operating system. What I would do is go back and make sure the version of Focusrite Control he’s running is the right one for his operating system. I haven’t seen him since, so I don’t know yet whether that would have fixed it.
If you’re seeing one preamp input on two ADAT channels, one thing worth checking is whether your version of Focusrite Control matches the version of macOS you’re on.
Not sure it’s the same problem? Ask a question first
