Case #8156FEB 2026Paul Andrews

Custom Live Performance Effects for Hardware Loopers: Per-Song Reverb and Delay on a Boss RC-505mkII

Client stress // Calm
Difficulty // Straightforward
RESOLVED
Setup
Boss RC-505mkII Loop Station · backing tracks played from memories · online delay and reverb time calculator
The problem
Wanted custom reverb and delay for each song in a live set played from a loop station: shorter for upbeat songs, longer for ballads.
What I found
The loop station doesn't know each song's tempo, so reverb and delay times have to be worked out from the bpm, which a DAW would normally do automatically.
What fixed it
Reverb and delay times from a free calculator entered as per-memory input effects. First few songs set up together; the client then finished the other 25 himself from my notes, with the bpm values set correctly for every song.

A performer wanted his own reverb and delay settings for each song in his live set on a Boss RC-505mkII Loop Station, so we worked out the values from each song’s tempo with a free online calculator and set them as input effects in each memory.

He plays his custom backing tracks from the loop station at his live shows, and he wanted custom reverb for each of the songs he was doing. For his upbeat numbers he wanted slightly shorter delay and reverb settings, and for his ballads slightly longer ones to suit them.

I said this was actually quite straightforward to achieve with the RC-505mkII, because it lets you assign input effects on a per-memory basis. He was using a memory location for each of his backing tracks, so each song could have its own reverb and delay settings.

We used some quite old-school 90s production methods to do it. With DAW-based production there are lots of tools that do things for you automatically, and the DAW can calculate reverb and delay times from the project’s tempo. Once you take your backing tracks out of the DAW and onto a hardware playback unit, you might need the old methods again. The loop station didn’t know the tempo of each song, so we had to work out the delay and reverb settings using a calculator. Fortunately we didn’t have to do any calculations ourselves, because a free website, the delay and reverb time calculator on Another Producer, works them all out.

I did this the way I usually teach. I work out how to do it for myself first, which takes me a few minutes at most, and then I go through the process again at a slower, explanatory speed. Then my client takes over and does it himself at a slower speed while I coach him, and by the third or fourth time he does it on his own, maybe with a few reminders from me. I also make notes for the client to refer back to. In this case I did the first few songs for him and then with him, and left him to finish the other 25 songs in his set using the notes I gave him. Those notes are below.

Finding the values for each song

  • Find the tempo of each song. You can search Google for the song’s bpm, or use a BPM tapper website to find it manually.
  • Open the delay and reverb time calculator and put the bpm in.
  • For the reverb, find the large room decay time and the large room pre-delay. For a song at 105 bpm these are 2250 ms and 35.71 ms.
  • For the delay, find the 1/16 dotted value, which is 214.29 ms for the same song.

Setting the effects on the loop station

In the reverb effect on the loop station I set these.

  • Time: the large room decay time in seconds, using the closest setting, so 2.2 s for a decay time of 2250 ms.
  • Pre-delay: the ms value from the calculator.
  • Density: 5.
  • D level: 100.
  • Low cut and high cut: flat.
  • E level: 30.

In the delay effect I set these.

  • Time: the closest value to the 1/16 dotted value from the calculator.
  • Feedback: 20.
  • D level: 100.
  • Low cut and high cut: flat.
  • E level: 30.

He’s a client I work with regularly, and I was pleased to hear from him afterwards that he’d used what we learned in the lesson to finish the rest of his set, with the bpm values set correctly for every song.

Is it strictly necessary to go into this much detail and set your reverbs separately for each track in your set? Maybe not. Most singers will just use the reverb that comes as standard on the mixing desk or the house effects. Some people like to go into detail with their music production and make sure everything is as perfect as it can be, and my client is certainly one of them. I think it’s the details that make a performance stand out, and the preparation work you do in advance pays off when it comes to the actual show.

Book a session (£90)

Not sure it’s the same problem? Ask a question first

Google
Laura Forrest-Hay profile picture
Laura Forrest-Hay
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Paul reinstalled all my lost sample libraries, streamlined the storage on my computer so it works faster and fixed my corrupted disk. it took us a couple of sessions and he was friendly and patient throughout. He never made me feel stupid and never over-explained stuff I already knew - in fact he boosted my confidence. Would highly recommend. I've put him on speed dial!
Google
MrMattkitt profile picture
MrMattkitt
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Paul was brilliant, listened to the issues I had on Cubase and my home studio, worked methodically through potential problems and sorted everything. Amazing service, down to earth and explained everything so I could understand. I am a very happy song writer once again thanks to Paul! Will be using Paul again in the future and highly recommend. Thanks Paul.
Google
Ciarán Hanna profile picture
Ciarán Hanna
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Honestly, if you're in any way stuck in a creative block because of the gear you have, you've more questions than answers about what the best setup should be for your flow, or even if you have very nuanced problems in your DAW/with your gear, the service Paul provides is second to none. Besides being an extremely nice guy, he knows his stuff and takes the time to understand what you want to get out of each session and makes sure all is good to go! Can't recommend him enough!
Google
Trudie Brogan profile picture
Trudie Brogan
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Really great service. Paul is so knowledgeable and I learned so much. Totally recommend.
Google
Cottin Ulysse profile picture
Cottin Ulysse
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Paul was fantastic, he solved my problem in less than 30mn, and he is a lovely guy. I really recommend him.
Google
Justin Bikram profile picture
Justin Bikram
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Paul provided as stellar service, worth every penny. I came to him with a genuine issue that was affecting my Logic Pro 11 album project regarding drums and midi maps and he solved my problem most efficiently. He was patient, courteous, quick thinking and highly knowledgeable. I will certainly consider using the service again and thoroughly recommend Audio Support - Thank you Paul - you are a star :)
Google
josh fulford profile picture
josh fulford
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Working in Reaper. Super knowledgeable, friendly, speaks in easy to understand terms. Paul is helping us DAW newbies get in the game. Paul got my lost plugin files working again as well as showed me how to find missing wave files for projects that were loading incorrectly. Keep this man on speed dial.
Google
Richard Grant profile picture
Richard Grant
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Paul fixed in around half an hour some midi keyboard/controller problems I have been trying to solve but have had to live with for around two years! He is very knowledgeable and patient and the Any Desk link worked perfectly. I wish I had found his website sooner and wouldn't hesitate to call on his services again. Rick Grant
Google
Paul B profile picture
Paul B
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Paul was excellent in helping me diagnose and resolve a problem I had on Logic Pro 12 file issues
Google
William Schrul profile picture
William Schrul
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Paul really helped get my Cubase up and running again. He really knows his stuff, and I'll definitely look him up again when I'm stuck. Thanks!!!