A client wanted to know he had every cable he needed before I came to set up his home studio, so we went through the inputs and outputs of each device in a remote session first.
He’d got in touch asking whether I could help him set up a home studio in London, and sent me photos of his equipment. He understood it might be a big job and asked roughly what it would cost and when I was available. I suggested an hour’s remote session to check his equipment and cabling before the on-site visit, so that when I arrived we would have everything we needed to connect it all up.
We spoke on the phone over WhatsApp and connected our screens with AnyDesk. His setup was Logic Pro running on a Mac, with a number of hardware synths including an Access Virus TI and a Roland, along with DJ equipment, a Mackie ProFX12v3+ analogue mixer and his audio interface.
The main reason for the session was to make sure he had all the cables necessary, so we went through his equipment one device at a time.
- Went through the inputs and outputs of each device.
- Checked he had the correct balanced and unbalanced jack cables for each connection.
- His Teenage Engineering setup uses mini jack connections rather than standard quarter-inch jacks, so we made sure he had mini jack cables in his collection as well.
- Checked he had enough MIDI DIN cables to connect everything up.
- Planned the space he would need for the setup.
Once we’d done this we confirmed everything looked good, and we arranged the on-site session for the following week.
Before a studio installation, list the inputs and outputs on every piece of equipment and check you have a cable for each one, including any mini jack and MIDI leads.
Not sure it’s the same problem? Ask a question first
